Bronze Cast

SAE660 BEARING BRONZE (UNS C93200)

Typical Analysis

C	Sn	Pb	Zn
83%	6.9%	7.0%	2.5%

Characteristics

Produced conforming to ASTM B505, SAE660 Bearing Bronze (Bars and Tubes). Produced oversized. to finish, machine to the nominal size ordered.
Density: 0.322 lb/in3 at 68℉; 8.91 g/cm3 at 20℃

Typical Applications

Industrial Machinery & Equipment Market: In-plant Equipment, Industrial Valves & Fittings, Turbines, Off-highway Vehicles
Products: Bushings, Plumbing Valves, Air Brakes, Brass Anodes for Plating, Brass Plating of Steel Belts in Tires, Wear Plates in Cranes, Hydraulic Seals, Gears, Bearings, Valve Stems, Turbine seals, Flanges
Transportation Equipment Market: Automotive Non-electrical, Railroad, Marine, Aircraft
Products: Motors, General Hardware, Carburetor Assemblies, Fittings
Military Market: All Specified Military Applications
Water Handling Equipment: Alloys used in Marine service and products such as seawater piping, pumps, valves, etc
Special Market (Fastest Growing Market) Products: Food Processing Equipment, Hydraulic Seals, Plumbing Valves, Wear Plates and Guides.

Mechanical Properties

Yield – 18,000 psi
Tensile Strength – 35,000 psi
Elongation – 20%
Hardness – 60-70 HBN

ALUMINUM BEARING BRONZE, ALLOY 954 (UNS C95400)

Typical Analysis

C	Fe	Al
85%	4.0%	11.0%

Characteristics

Produced conforming to ASTM B505, Alloy 954 Aluminum Bronze is produced oversized to finish, machine to the nominal size ordered..
Density: 0.340 lb/in3 at 68℉; 9.41 g/cm3 at 20℃

Typical Applications

adjusting nuts

agitators

ball socket seats collets

blanks and rolls

boring tools

cam followers and slides

chuck Jaws

chutes

collets

cylinder mold tie rods

die rings

draw dies

fasteners

fingers

fittings

farming rolls and sections

gibs and ways

guide pins

hold down bars

hydraulic valve parts

inserts

keys

lathe beds

liners

machine tool parts

mandrels

pickling hooks

pilots

piston guides

plastic mold applications

plungers

pump rods

runout table slides

scraper blades

screw down nuts

shoes

slides

steel mill slippers

strike plates

support rails

brine slurry equipment tie rods

unscrewing mold components

wear plates and strips

welding jaws

wipers

wiping blocks

work rest blades

Mechanical Properties

Yield – 35,000 psi
Tensile Strength – 85,000 psi
Elongation – 18%
Hardness – 140-170 HBN

For more Info About Our Products